Home > Products > Battery PCM/BMS/PCB > 3S-4S LiFePo4/Li-ion battery BMS > Lws PCB PCM 4s 150A 12V 12.6V LiFePO4 BMS with RS485 Can Smbus

Products

New Products

Lws PCB PCM 4s 150A 12V 12.6V LiFePO4 BMS with RS485 Can Smbus

The LWS PCB PCM 4S 150A 12V 12.6V LiFePO4 BMS with RS485 Can Smbus. This cutting-edge battery management system combines high capacity (150A) and precise voltage control (12V/12.6V) for LiFePO4 batteries. With advanced communication protocols including RS485, CAN, and SMBus, it ensures seamless integration into your power systems. Trust in LWS's expertise for top-tier Lithium battery protection.

Model:LWS-4S150A-779

Send Inquiry

Product Description

Product Introduction

The Lws PCB PCM 4s 150A 12V 12.6V LiFePO4 BMS with RS485 Can Smbus is a high-performance Battery Management System designed for 4-series LiFePO4 battery packs. It features a robust 150A continuous discharge capability and operates at a voltage range of 12V to 12.6V. Additionally, it is equipped with communication interfaces including RS485, Can, and Smbus, enabling efficient data exchange and control capabilities for the battery system.

Product Parameter (Specification)

LWS-4S150A-779

Test item	Description	Criterion
Voltage	Charging voltage	DC:14.4V CC/CV
Voltage	Balance voltage for single cell	3.2±0.025V
Current	Balance current for single cell	55±5mA
	Current consumption	≤70uA
	Maximal continuous charging current	≤100A
	Maximal continuous discharging current	≤150A
	Maximal discharging current (time)	Nonee
Over charge Protection	Over charge detection voltage for single cell	3.75±0.025V
	Over charge detection delay time	0.5~1.5S
	Over charge release voltage for single cell	3.55±0.05V
Over discharge protection	Over discharge detection voltage for single cell	2.30±0.05V
	Over discharge detection delay time	500~1500mS
	Over discharge release voltage for single cell	2.5±0.10V
Over current protection	Over discharge current protection	280±50A
	Detection delay time 1	500~1500mS
	Detection delay time 2	500~1500mS
	Overcharge current protects current	150±50A
	Detection delay time	500~1500mS
Short circuit protection	Short circuit protection current	≈500A
	Detection delay time	50~800uS
	Protection condition	Exterior short circuit
	Release condition	Cut load,Auto recovery
Temperature	MOSMOS temperature protection	/
	Charge high temperature protection	55±5ºC
	Charge low temperature protection	0ºC
	Discharge high temperature protection	75±5ºC
	Discharge low temperature protection	-15±5ºC/
	Release condition	The temperature drops to 50ºC, charging release
	Operating temperature range	-20~+60ºC
	Storage temperature range	-20~+60ºC
Resistance	The on-state resistance of the main circuit	≤5mΩ
Break circuit protection	Disconnect the voltage sampling circuit to turn off the charge and discharge	Support
NTC Protection	Thermistor temperature protection	Support
Electronic switch	Electronic switch	Nonsupport
Reverse polarity protection		Support

Product Details

1.Provides protection for 4 series LiFePO4 battery pack

2.Provides protections in charging and discharging

3.Processes the balance between cells smartly, the current of it can be set freely by external components.

4.Deals with over-current and short-circuit protection with circuit itself

5.Protect an electrical circuit from damage caused by over current/ over load or short circuit

6.Support SMBUS protocol

7.Support Bluetooth protocol

Notes

1) Wire connection strictly according to the drawing, do not intentionally short circuit.
2) Before charged, need to connect the cables first.
3) When the group of battery is connected in series, ensure that the voltage of each group of batteries voltage is the same. If not, fill each group of batteries separately before connecting them in series. In discharge tests, the group of cells with the fastest voltage drop is the differential cell.

Hot Tags: Lws PCB PCM 4s 150A 12V 12.6V LiFePO4 BMS with RS485 Can Smbus, Manufacturers, Suppliers, Wholesale, Customized, CE, China, Factory, Quality, Price

Product Tag