The Smart 6S 50A 19.2V 22.2V Li-ion/LiFePO4 BMS with bluetooth is an advanced battery management system that combines intelligence and connectivity. With a capacity of 50 amps, it efficiently safeguards and optimizes 6-series Li-ion or LiFePO4 battery packs, all while offering Bluetooth connectivity for remote monitoring and control, making it a cutting-edge choice for battery management needs.
Product Parameter (Specification)
LWS-S3-14S300A
Product information (The following parameters are tested at 25ºC ambient temperature unless otherwise specified) |
||||
product model | LWS-S2-6S50A | |||
Continuous current (A) | 50 | Size (mm) | 132x58x15 | |
Maximum voltage per section (V) | LiO2 | ≤4.25 | Nominal capacity (Ah) | To be set |
LiFePO4 | ≤3.65 | |||
Single section voltage accuracy (mV) | ±25(At 25ºC) | Total voltage accuracy (mV) | ±100 | |
Balance pattern | Charging/Automatic | Balance current (mA) | ≤50 | |
Interface means | Same mouth | SOC accuracy (%) | ±5 | |
Operating temperature (ºC) | -40 ~ 85 | Operating humidity | ≤85% RH | |
Storage ambient temperature (° C) | -40 ~ 125 | Humidity Storage | ≤85% RH |
Product Details
1.Highly integrated analog front end (TI analog front End)
2.Isolated power supply circuit
3.Automatic balancing and configurable
4.Parameters can be adjusted and set
5.Short circuit current and time can be configured
6.High voltage accuracy (≤20mV)
7.High current accuracy (≤2%@FS)
8.SOC /SOH estimation with accuracy up to 5%
9.Two-level low power consumption, minimum power consumption of 5uA, can be shut down to protect the battery
10.Firmware upgrade, Internet of things
Notes